Skip to main content
Version: 2024.2

Relational Datatypes

Many-To-One, Many-To-Many and Many-To-Many Object Relation Data Fields

Many-To-One, Many-To-Many and Many-To-Many Objects are pure relation data types, which means they represent a relation to an other Pimcore element (document, asset, object). The Many-To-One and Many-To-Many data types can store relations to any other Pimcore element. In the object field definition there is the possibility to configure which types and subtypes of elements are allowed.

The Many-To-Many Object field allows relations to one or more data objects, but no other elements. Therefore the restriction settings for objects are limited to object classes.

The width and height of the input widget can be configured in the object class settings. For a Many-To-One relation only the width can be configured, since it is represented by a single drop area. Lazy Loading is explained further below in the section about relations and lazy loading.

The input widgets for all three relation data types are represented by drop areas, which allow to drag and drop elements from the tree on the left to the drop target in the object layout.

In addition to the drag and drop feature, elements can be searched and selected directly from the input widget. In case of objects it is even possible to create a new object and select it for the objects widget.

Relation FieldsRelation FieldsRelation Fields

Filtering for relations via PHP API

These pure relation types are stored in a separate database table called object_relations_ID. In the according object_~ID~ database view, which is used for querying data, the relations fields are summarized as a comma separated list of IDs of related elements. Therefore, if one needs to create an object list with a filter condition on a relation column this can be achieved as follows:

$relationId = 162;
$list = new \Pimcore\Model\DataObject\Example\Listing();
$list->setCondition("mySingleRelation__id = ".$relationId);
$objects=$list->load();


$relationId = 345;
$list = new \Pimcore\Model\DataObject\Example\Listing();
$list->setCondition("myManyToManyRelations like '%,object|".$relationId.",%'");
$objects=$list->load();

Assigning relations via PHP API

In order to set a Many-To-One data field, a single Pimcore element needs to be passed to the setter. With Many-To-Many and Many-To-Many Objects, an array of elements is passed to the setter:

use Pimcore\Model\DataObject;
use Pimcore\Model\Document;
use Pimcore\Model\Asset;

$object = DataObject::getById(12345);

$object->setMyManyToOneField(Document::getById(23));

$object->setMyManyToManyField([
Asset::getById(350),
DataObject::getByPath("/products/testproduct")
]);

$object->setMyManyToManyObjectField([
DataObject\Product::getById(98),
DataObject\Product::getById(99)
]);

$object->save();

Deleting relations via PHP API

In order to remove all elements from this object's Many-To-Many field, the setter can be called with null or an array:

$object->setMyManyToManyField([]);

//that would have the same result
$object->setMyManyToManyField(null);

Internally the setter sets the value to an empty array, regardless if an empty array or null is passed to it.

Unpublished relations

Related items that are unpublished are normally not returned. You can disable this behavior like this:

//also include unpublished relations form now on
DataObject::setHideUnpublished(false);
//get a related object that is either published or unpublished
$relationObject = $relation->getObject();
//return to normal behavior
DataObject::setHideUnpublished(true);

Allow inline download of asset

You can enable inline download of assets from relations if you check the "Allow inline download" checkbox.
If the relation is an asset, it will be directly downloaded. If the relation is a folder, a zip file will
be downloaded.

Disable clear complete relation

If you want to disable the possibility to clear the whole relation, you can uncheck the checkbox "Allow to clear all relations of this field"
in the classdefinition.

Advanced Many-To-One Object Relation

This data type is an extension to the Many-To-One Object data type. To each assigned object additional metadata can be saved. The type of the metadata can be text, number, selection or a boolean value.

A restriction of this data type is that only one allowed class is possible. As a result of this restriction, it is possible to show data fields of the assigned objects. Which metadata columns are available and which fields of the assigned objects are shown has to be defined during the class definition.

Advanced Many-To-One Object Relation ConfigurationAdvanced Many-To-One Object Relation ConfigurationAdvanced Many-To-One Object Relation Configuration

The shown class definition results in the following object list in the object editor. The first two columns contain id and title of the assigned object. The other four columns are metadata columns and can be edited within this list.

Advanced Many-To-One Object Relation FieldAdvanced Many-To-One Object Relation FieldAdvanced Many-To-One Object Relation Field

All the other functionality is the same as with the normal objects data type.

Access objects with metadata via PHP API

use Pimcore\Model\DataObject;

$object = DataObject::getById(73585);

//getting list of assigned objects with metadata (array of DataObject\Data\ObjectMetadata)
$objects = $object->getMetadata();

//get first object of list
$relation = $objects[0];

//get relation object
$relationObject = $relation->getObject();

//access meta data via getters (getter = key of metadata column)
$metaText = $relation->getText();
$metaNumber = $relation->getNumber();
$metaSelect = $relation->getSelect();
$metaBool = $relation->getBool();

//setting data via setter
$relation->setText("MetaText2");
$relation->setNumber(5512);
$object->save();

Save objects with metadata

use Pimcore\Model\DataObject;

//load your object (in this object we save the metadata objects)
$object = DataObject::getById(73585);

//create a empty array for your metadata objects
$objectArray = [];

//loop throu the objectlist (or array ...) and create object metadata
foreach ($yourObjectsList as $yourObject) {

//create the objectmetadata Object, "yourObject" is the referenced object
$objectMetadata = new DataObject\Data\ObjectMetadata('metadata', ['text', 'number'], $yourObject);
//set into the metadata field (named text) the value "Metadata"
$objectMetadata->setText('Metadata');
//set into the metadata field (named Number) the value 23
$objectMetadata->setNumber(23);

//add to the empty "objectArray" array
$objectArray[] = $objectMetadata;
}

//set the metadataArray to your object
$object->setMetadata($objectArray);

// now save all
$object->save();

Advanced Many-To-Many Relation

This datatype is similar to the Advanced Many-To-One Object Relation data-type in the way that additional information can be added to the relation.

The main difference is that all element types (documents, assets and objects) can be added to the relation list. The element types can also be mixed. Essentially, the same rules as for the standard Many-To-Many Relation apply.

The API is nearly identical. However, instead of dealing with an ObjectMetadata class you have to do the same stuff with ElementMetadata.

use Pimcore\Model\DataObject;
use Pimcore\Model\Document;

$referencedElement = Document::getById(123);
$references = [];
$elementMetadata = new DataObject\Data\ElementMetadata('metadata', ['text', 'number'], $referencedElement);

//set into the metadata field (named text) the value "my lovely text"
$elementMetadata->setText('my lovely text');

//set into the metadata field (named Number) the value 23
$elementMetadata->setNumber(23);


$references[] = $elementMetadata;

//set the metadata array to your object
$object->setMetadata($references);

Lazy Loading

Note that from 6.5.0 on relations are always lazy loaded. The configuration option has been removed.

Whenever an object is loaded from database or cache, all these related objects are loaded with it. Especially with Many-To-Many relations it is easy to produce a huge amount of relations, which makes the object or an object list slow in loading.

As a solution to this dilemma, Many-To-Many relational data types can be classified as lazy loading in the class definition.

Lazy LoadingLazy LoadingLazy Loading

Attributes which are lazy loaded, are only loaded from the database/cache when their getter is called. In the example above this would mean, that the Many-To-Many relational data is only loaded when calling $object->getMyManyToManyField();.

Dependencies

There are several object data types which represent a relation to an other Pimcore element. The pure relation types are

  • Many-To-One Relation
  • Many-To-Many Relation
  • Advanced Many-To-Many Relation
  • Many-To-Many Object Relation
  • Advanced Many-To-One Object Relation

Furthermore, the following data types represent a relation, but they are not reflected in the object_relation_.. tables, since they are by some means special and not pure relations. (One could argue that the image is, but for now it is not classified as a pure relation type)

  • Image
  • Link
  • Wysiwyg

All of these relations produce a dependency. In other words, the dependent element is shown in both element's dependencies tab and Pimcore issues a warning when deleting an element which has dependencies.

DependenciesDependenciesDependencies